Tange Seiki MX320 Headset
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsIf you have a question about this product, want to know more information or just have a general question please fill out the form below and let us know what you are looking at, and what you would like to know. Alternatively you can call us on 01942 826598 if it is urgent.
Old school BMX, everything to do with retro 80s and 90s bmx bikes. Parts, Frames, Complete Bikes all you need to restore your BMX bike.
Including GT, Haro, Dia-Compe, Panaracer, Neptune, Mirage, Skyway, Tioga, ODI, Haro, Profile, Tange, Nitto Bullseye, SE Racing, MCS, Raleigh, Diamond Back and more!
The classic high end alloy Tange-Seiki MX-320 headset re-made but now with sealed bearings for super smooth and awesome rattle free operation but...
View full detailsThere simply is no more iconic 1980’s BMX product than Skyway Tuff Wheels. Skyway's original Tuff Wheel: Fast, smooth, and reliable; these Tuffs e...
View full detailsHaro have reproduced their 1980's Fusion DX alloy pedals close to the original Shimano DX design, available in 1/2" or 9/16" in a choice of colours...
View full detailsDia-Compe MX-1000 old school BMX brake caliper, the most popular brake of the 1980's, re-issued by DiaCompe in black, blue, gold, red, silver or wh...
View full detailsClassic Old School BMX Dia-Compe Tech 3 brake levers, sold here as apair in black, blue, gold, red, silver or white. NOTE: The lever blades thems...
View full detailsThe A’ME Round was one of our best selling grips for us back of 1980’s and rejoice, they are still making them, in the USA just like they always we...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe Dia-Compe MX-890 pre-dates the MX-1000 and along with Shimano was the brake of choice before the "1000" came out. Perfect for all 80's restorat...
View full detailsThe classic 1980's MKS BM-7 alloy caged pedal is now available in 1/2" thread to fit one-piece cranks for your Raleigh Burner, Diamond Back Silver ...
View full detailsDiaCompe finally re-make the Tech-III lever to go with the MX1000 and MX890 they did recently. In White, Black, Red, Blue, Gold, Silver. • 22.2mm ...
View full details• Alloy old school BMX style speed chainring.• 110BCD 5 arm design to fit old Sugino, SunTour and SR cranks/spiders and powerdiscs. Also fits mod...
View full detailsDiaCompe re-make of the iconic 1980's Tech 3 brake lever to go with the MX1000 and MX890 brakes for your old school BMX resto. • These originally ...
View full detailsPanaracer HP406 old school BMX freestyle tyres sold here as a pair (2) along with 2 quality innertubes. • Lightweight skinwall old school freestyle...
View full details• Top load old school stem, based on a classic 1980's SunTour Power Stem. • Chrome plated bolts and shaft. • Available in ED Black, Blue, Gold...
View full detailsThe classic MX-1500 old school two bolt seat clamp remade by DiaCompe. 25.4mm for almost all old school frames. 5 colours. • Full choice of colou...
View full detailsThe SE Racing Bear Trap pedals offer authentic Old School BMX styling, and a lot of grip and stability. The extra wide “bear trap” cages keep your ...
View full details• Lightweight, high quality ID Aluminium replacement chainring bolts.• Anodised colours - Blue, Gold, Green, Black, Red or Purple (1/3 the weight ...
View full detailsPanaracer lightweight skinwall HP-406 old school BMX freestyle tyre remade from the 1980's by Panaracer in black, blue, red or white, 20x1.75" size...
View full detailsHaro continue to roll out the Genuine Vintage line of reproduction old school classics and the Group 1 stem, based on the original 1987 stem, is on...
View full detailsOn the very first Robinson bikes that we built in February 1981, these MKS BM-7's are the very pedals we used, along with KKT Lightnings. • Highes...
View full detailsFor the first time ever, we have available the 6 spoke Skyway Tuff Wheels! Like the 5 spoke versions these are made in USA and now come with sealed...
View full detailsGenuine DiaCompe 883QR was previously known in the 80's as the Nippon (first produced in 1986), it was a progression from the long-lived MX-1000. S...
View full detailsThe Wellgo BearTrap pedals are based on the classic SunTour XC-II pedals from 1981. The extra wide “bear trap” cages keep your feet exactly where t...
View full detailsAME Cam BMX grips are an old school BMX classic. For those in the know, A'ME were the grips of choice for the majority of the Pro's back in the 80...
View full details• Sold as a pair of two. • 9 inches long. • See options for colours available.
Genuine DiaCompe GRAN COMPE Single speed chainring bolts sold as a pack of 5 in black, blue, gold or red. 6.5mm long for single chainring use.Ligh...
View full detailsSkyway recreated the iconic alloy riveted flange design of the early 80's Tuff II Wheels with upgraded modern sealed bearings to give a classic loo...
View full detailsNow available from Alans BMX as a pair - genuine Dia-Compe classic Tech 4 (MX123) levers from the 1980's. Black, Blue, Gold, Red, Silver or White....
View full detailsMade in the USA from the same company that made them over 40 years ago, A'ME Full Waffle MX style grips are a BMX classic for maximum traction, ava...
View full detailsThe legendary Handler by Kashimax, first released in 1987, is back! Made in Japan, just like they always have been. The Kashimax Handler FS featur...
View full details7 spoke 24 inch versions of the legendary Skyway Tuff Wheels available in black, blue, red, white or yellow with sealed bearings for your 24" Old ...
View full detailsThe original two finger DiaCompe Tech-II under bar lever has been re-issued. There were popular in the late 70's and early 80's. • Designed to s...
View full detailsBefore the Tech-III that everyone knows, came, unsurprisingly, the Dia-Compe Tech 2. Designed to sit on the upright/bend of your bars. • Lightweig...
View full detailsA’ME BMX 1/2 Waffle grips are manufactured in the USA by people who have been involved in the grip industry for over 40 years. A BMX classic especi...
View full detailsLightweight, high quality ID Aluminium replacement chainring bolts in 8.,5mm size for double chain rings.• Anodised colours - Blue, Gold, Green, Bl...
View full detailsExactly the same as the Skyway BMX grips sold a few years ago. Kurled pattern. Closed end.
Kool Stop have formulated a new compound with our Continental line of brake pads specifically for composite wheels. They have colour matched and fi...
View full detailsNow Kashimax is bringing back the saddle which upon release in 1984, continued the successes if the Aero and MX-C models. Styled for racing and ...
View full detailsThe pad that started it all. The Kool Stop INTL salmon brake pad was the first pad produced by Kool Stop and is where they got their name from. Av...
View full detailsNeptune BMX CNC machined alloy power disc with two sets of holes to fit 130 and 110 BCD 5 arm chainring patterns. US made CNC-machined aluminium in...
View full detailsClassic S&M Bikes re-issue Whip Girl 2 piece padset for frame and handlebar crossbar, made in USA by Flite BMX. Perfect for your Mid School S&...
View full detailsTo celebrate 40 Years Alans BMX have teamed up with the best brand in BMX - S&M of course! S&M have made us a total of just 40 frames, all...
View full detailsFinally Dia-Compe re-issue the classic pre- Tech-III 132MT45 Brake Levers. These iconic levers were supplied on most bikes in the 70's right into ...
View full detailsThe famous A’ME Triangle is on the end of one of the most popular BMX Grips of the 1980’s. A’ME is proud to introduce the 702 Grips to the BMX mar...
View full detailsThe original BMX pad company who made the pads on our Robinson Team bikes back in 1981. Still produced by hand in USA, these vinyl snap plain pad ...
View full detailsThe A'ME Mini the based on legendary A'ME Round grip - one of our best selling grips for us back of 1980’s and rejoice, they are still making them,...
View full detailsGenuine Dia-Compe 46t chain ring for use with 1/2 x 1/8" chain with 130BCD pattern. Specifications Material CNC Alumnium Fitting 5 arm Speed...
View full detailsReplacing the drivetrain on your old school ride? Make it easy with this crank, bottom bracket and MKS pedal kit from Alans BMX. Works perfectly wi...
View full detailsOpening Hours
Monday-Friday 9am-5:30pm
Saturday 9am-5pm
Sunday CLOSED
Get Directions